Daily Updates!
Stay informed of NEWEST chapters of Black Iron’s Glory (updated) with notification directly sent to your email.
LOG IN
app2 ();
Three hundred and ninetieth chapters recruit
"Claude, why do you use a copper bullet casings?"
"Why bullet casings slightly larger than a bullet?"
"Why not round bullet, put it into something you cone type?"
"Why do not the whole entire bullet in the barrel where you can also shoot so far?"
"How did you come up with this concept of a revolver?"
"There, Claude, you are really talented runner bursts of this design idea, how do you think you can tell me?"
"Yes, Claude, if I put the revolver's barrel extension, followed by the butt of a rifle, then it is not possible to produce a long rifle revolver?"
......
Sonia This incarnation Why do thousands of baby in one hand and put it down the revolver looked, Claude's arm with one hand and kept their doubts.
Claude has turned a supercilious, the heart that I know what bullet casings than the big reasons why the bullet ah, anyway, the success of this revolver is just that the boss draws on past lives pistol model construction and Westerns impression. Really let Claude explain he can only cut the crap and not like some of the concept is, after all, next to a master Byrd positive Shuzhaoerduo prepared to listen to his answer, which can not be successful relationship to solicit questions, are not g Lord is not careful.
. "You let me go first, Sonia, in fact, you just put a lot of problems are connected and repeat the" Stern replied Claude cough twice, and so on Sonia let go of his arm, he was invited to: "uncle, Sonya, you first, and I returned to the laboratory bar, where there is paper pen, and I can tell you that I designed the ideas and thoughts when the revolver."
Back to the laboratory and only Claude, sister Anna, Sonya Bird and four Masters, small Mark wanted to learn horse riding, Claude, I ordered Mai Jieke carefully cared for him this first godson, as big Pygmy, still standing guard outside the laboratory.
"I was very young, not like short compared to long barreled guns, its power is too small, and filling the same tedious.." Claude is so the opening: "I did not often think understand why the short length of the gun has a standard half or one-third of long guns, but the range and power it would be such a big difference? "
Claude looked at Sonya, gave her a smile: "Ten years ago the eastern region of the war, when I was a lieutenant general officer, you need to personally lead troops into battle, according to Wei level officers with weapons I need to bring short swords, guns standard, as well as a strapped thigh short gun.
The fact that short gun useless on the battlefield, has become a burden. My colleagues often casually firing a shot towards what to throw away a short gun, without reservation or take the sword bayonets on the guns rushed to the front and fight the enemy, and since then, I wanted to design a reliable short firearms, allows us to guard themselves on the battlefield.
The greatest weakness is the short-barreled filling trouble, although short-barreled set equipment have adopted the paper tube bullet, but still need to clean the barrel or launch, then set the paper roll loading bullets from the gun to go into, with sets bar top real bullets,Then open the fire box, fire needle prick paper tube, exposing the inside powder, lead powder is then poured into the required fire box, and gunpowder in contact with the exposed paper tube, and then ignited to fire the cartridge clip Matchlock above, so that it ready to aim and shoot ......
This series of operations is too much trouble too cumbersome, on the battlefield did not have much time to make a lieutenant general officer with a short gun from the guard or destroy the enemy. I was just thinking, this process can simplify some more, then I thought to want to, I hit upon the idea to set the paper roll loading bullets.
My initial idea is to directly ignite a given bullet loaded paper tube inside the powder, you do not need any fire box fire needle matchlock these things, I think that would be very simple, that is mounted behind the Flint Paper given loading bullets, then short behind the flint gun fitted with the striking hammer, which ignite gunpowder paper tube, gun-emitting out. "
"At that time I was in the village of squirrels, but also you and I know." Claude nodded punch Sonya, Sonya blushed.
Claude continued: "Then we will discuss the possibility of a breech-loading, and I was the first to design a short gun like this ....."
Claude paper drew the short gun, only one barrel, the barrel back is a big hammer device, there is no such a mess matchlock fire box wood care Barrel and trigger, barrel above something that looks very simple, and then again in Claude drew a barrel below the curve can be bent.
"I was wanted to design such a short gun, the barrel can be bent down, from a bullet into the back, and then use the hammer ignition launch, so it is easy on the battlefield more. If possible, I would also like to increase the butt of a gun barrel or two, so one can launch or three bullets are continuously transmitted three times, "Claude shrugged, made a helpless expression:." but my design fail, I think the beautiful, the result is not achieved. "
Then Sonia chimed in: "Claude, breech-loading rifle model after the first and I actually designed this to you almost as well as bending down loading of gunpowder and later with the hair, I tried. look at this loading mode, the result of its range is only about two hundred and sixty meters ...... "
Claude nodded his head: "You are a practical test the results, I was not so easy in the military, but I also use a damaged on the battlefield a few muskets made a point tests and found that the biggest problem is that the bullet instead the barrel. paper is not suitable given the bullet loaded breech loading mode, for example, installed in a given paper roll mounted on the bottom of the bullet flint, then hammer hitting a fire, the paper will sometimes hammer cylinder means fixed to front barrel to push the bullet, hit without spark.
Paper or fixed installation because the bullet hit and curled, these are the reasons for striking flint misfiring rate is too high, not every hammer can hit the flint spark ignition Paper given so loaded bullet inside the gunpowder. After the discovery of this problem, I wanted to use something to replace the paper roll to do this bullet casings ......
During stationed squirrel village, I found a magician in the seclusion of the mountain, in her help, I do a lot of testing,Finally we found the most suitable bullet casings of leather or brass, because brass has very good ductility. If you do bullet casings with a metal case, will make every bullet fired bullet casings split iron, copper bullet casings not like this and they can be used again. Also too expensive gold and silver, lead and zinc too soft and easily deformed, steel is too hard and too brittle, are not made of brass bullet casings so good performance.
After loaded instead of paper tube set with brass leather, has emerged a problem that the bullet fired cartridge cases easily stuck in the barrel inside, takes too much effort to pull out. This puzzled me for a long time, only to later once the artillery combat exercise when we come to make me want to understand the truth. "
Claude again picked up a piece of paper and drew a very simple shape cannon: "You noticed, all of the guns are thick at the bottom, above the barrel thinner but I was also curious, ask a? old artillery, cannon to the bottom of why the cast so thick.
The old artillery replied that, if you do not make too thick, so much gunpowder explosion on the inside, it is easy to cannon exploded. It is because the cast of thick, gunpowder after the explosion at the bottom, sides and bottom of the barrel by the shackles of gunpowder enormous power generated by the blast can only impact the direction of the barrel, so that the heavy solid projectile to push out ... ...
The old artillery, then gave me a revelation, since the launch of the cannon is so, then guns do not emit the same truth? In fact, the two situations are the same, nothing more than a bigger one smaller. I summarize a bit, guns also need to launch only one direction surrounding the openings are sealed space remaining after this is ignited gunpowder explosion generated power will shoot the bullet went in the direction of opening.
If my vision right, then my brass bullet casings in fact, has replaced the role of the barrel, igniting gunpowder exploded bullet casings inside, and inside the barrel is the same, the next bullet just need to quasi barrel on the line. This is my handle shells made slightly larger than the bullet reason, because this bullet casings will no longer stuck in the barrel inside.
I just need to get hold of the rest of what the sub-shell to the horde without their loose on it, but also can prevent deformation of bullet casings and bullets burst emission. So I do not need a better barrel to withstand the explosion of more propellant, filled as more propellant powder in the barrel like Sonia to increase the range of bullets actually take a detour ...... "
Sonya burst into tears, saying that Claude let her feel it is a bit humiliating. As a firearms manufacturing experts, and hate her now that he is a muscle, just know that increased propellant powder and bullets make life difficult for the barrel, spoil the results of more than eight root barrel wasted six months nothing developed, and why that can not be changed under the idea from the start like a bullet Claude ah.
"With this, after copper jacketed bullets, you can create a short-barreled pistol. But the problem is misfiring rate is too high, and as I have said, the bottom of the bullets loaded flint and can not guarantee that every hammer strike the spark. no one can guarantee that you've been there or replace the hammer hitting the bullet and turn a blind eye to your enemies on the battlefield,So I designed the short-barreled pistols are still not very practical.
A long time because they can not find a hair blow fire gunpowder, making short blunderbuss pistol can only draw on the drawing. Then I saw a waterwheel, is the kind installed in the ditch bamboo spoon above the water and then go to the bamboo tube of water into the fields waterwheel, I believe you should have the impression, right? I had an inspiration, if a bullet misfiring, then immediately go to the next bullet to go a lap down, will always have two three bullets fired out, this is better than staring at a dead misfiring bullet desperately to hit with a hammer Well ......
So I started designing revolver, which is placed in front of us. By calculation, I found a wheel filled five to six bullets is the most appropriate, it is too complicated, error-prone, not even the right hammer to tap the bottom of the flint bullet, so I designed the six bullet runner, then went on to design the barrel and frame, the final result is in front of you these three revolver. "
Claude picked up a revolver and broke the wheel to win, put up and re-installed: "The design of this wheel, I also thought about how fast loading bullets on the battlefield later thought. after playing out one bullet bullet does not need to be refilled directly take a full bullet Runner up more convenient ......
But I have to thank here at Sonya, if not send you invented gunpowder, in fact, I designed this revolver or will not see the light plug in the box. Way misfiring rate since hitting a fire with flint hammer emission is too high, my sister Anna had done a test, once runner hit twice, one bullet also launch does not go out, so I can only plug them in the box ...... "
Byrd master gently clapping: "I have to congratulate you, Claude, you let these so-called master firearms really feel ashamed of your success to design a completely different type of new matchlock firearms. it has been very good and perfect, almost no room for improvement, but I still have a question, why do you call a revolver, not revolver? "
Claude sweat all down, right ah, why the call for the revolver, rather than revolvers, I go on to ask what ah? Process carted how their own design and manufacture of this revolver to fool the past, the elderly are most worried about is that he was just a question of arms design amateurs, how could such a perfect design and manufacture of a mature firearms .... ..
Fortunately, no doubt Byrd master design through, but this name to tangle. Claude wiped his forehead of sweat, unconscious of the hands of the revolver to remove the runner demolition. Suddenly had an idea: "Well, uncle, did you find that every time I removed the wheels are coming from the left to win it, so I used to call for the revolver, revolvers actually can, but the revolver did not sound pleasing to the ear and then cool ...... "
"Yes, uncle, you can stay here and Sonya help me?" Claude asked.
"Help you?" Byrd master Claude looked somewhat puzzled: "This revolver design has been successful,what can I do for you? "
"Well, uncle, you know that three revolvers are my sister out in the alchemical magic refining character array. If you want to carry out large-scale production, it is necessary to standardize the design of each component, in order to achieve mechanized production requirements and manual assembly.
Further, a need to design and manufacture standard production line bullets, bullet that specializes in the production of brass bullet casings. If you let my sister assembled in alchemical magic character array, I can not believe she installed a few hundred a day, and will soon be bored.
During standardized design and mass production in this area, my sister and I are an outsider, do not understand from where to proceed. In addition, I would like to design a spear, also firing bullets that brass shell casings, but the design revolver has made me racked his brain, how could not think of guns emission structure ..... .
So I hope you can stay and Sonya help me, if you wish, I can single-handedly built a laboratory firearms for you to meet all your requirements ...... "
And spend a lot of firearms lab, required machinery, materials consumption test a few. Especially Byrd master and Sonia were both Rune magician, magic consume some more material is a lot of expense. Claude went firearms repair workshop laboratory Byrd there set up their own masters, it can only be said to be very simple, and the sister laboratory conditions simply can not be compared. So only with Sonia Byrd on behalf of the master in charge of firearms repair workshop to take those tests do a good barrel, the barrel spoil too much attracted protests Ombudsman.
Sonia grin, the requirements of their own little lover of a promise: "I can help you to stay ......"
Bird touches master hesitated for a moment, smile: "Claude, I do not want to help you, but here no external conditions, because a good manufacturing firearms workshop or a production line must have sufficient water power ..... "
Claude laughed: "Uncle, we do not need to water resources, because we have a fire engine."
app2 ();
()
chaptererror ();
Remember the book launching domain name: www.xxqb5200.com. Full reading the novel network Mobile URL: m.xxqb5200.com
Enter your email address that you used to register. We'll send you an email with detailed steps to reset your password.
By signing up, you agree to our Terms of Service and Privacy Policy.
Already a member? Log In
Stay informed of NEWEST chapters of Black Iron’s Glory (updated) with notification directly sent to your email.